2 Axis Tilt Switch (HMTS2CFG10B)

When Falling Over Is Not An Option

Hummingbird Electronics' two-axis tilt switch is a simple to configure, flexible tilt switch with a wide range of applications. The tilt-switch can be operated horizontally, vertically or upside down and can be configured for single or dual axis operation. The switch set-point is user configurable.

Powerful Performance

Hummingbird Electronics' tilt-switches measure pitch and roll angles with high accuracy by measuring the earth's gravitational field with a three axis accelerometer.

A dip-switch provided allows the user to select horizontal or vertical operation and allows single or dual axis operation. Once mounted, the tilt-switch can be opened and calibrated by pressing a push-button switch internal to the device. This will compensate for small angle offsets due to mounting. The unit should be calibrated at least once if it is to be used upside down.

The damping factor (how much averaging is performed) can be changed between two values for fast operation and noise immune operation.

A hysteresis value can be set to be either 0.5 degrees or 1 degree. With a set-point of 10 degrees and 1 degree hysteresis, the relay will switch on at 10 degrees and off at 9 degrees. Hysteresis prevents the internal relay from continuously switching on and off at the switch-point.

The activation angle can be set between 1 and 64 degrees using the internal dip-switch. A relay with contacts rated at 10A will switch on when the angle set-point is exceeded. Voltage free Normally-Open, Normally-Closed and Common contacts are provided.

An internal bi-colour LED is normally green and changes to red when the relay is activated.

Rugged Hardware

The configurable tilt-switches are supplied in a rugged aluminium enclosure that is splash-proof. Provision for screw mounting when required is provided.

Power to the unit and outputs are provided through colour coded wires.

Please note that the integrated relay outputs are not internally fused. Driving currents larger than those specified will result in damage to the tilt-switch.

Electrical Characteristics

  • Output Specification: Maximum Relay Voltage: 36V DC, Maximum Relay Current: 5A – not fused
  • Input voltage: Minimum: 9V, Maximum: 36V
  • Power consumption:
    • Typically 15mA(relays off) and 35mA(relay on) at 12V in
    • Typically 7mA(relays off) and 30mA(relay on) at 24V in
  • Internal sampling frequency: 10Hz (100msec)

Interface Specifications

Connection specification:
  • Red: Power (9-36V)
  • Black: Ground (0V)
  • White: Relay Common
  • Blue: Relay Normally Open
  • Brown: Relay Normally Closed
DIP Switch:
  • SW 1-6 set tilt angle 0-64; switch weighting is 1 for sw1, 2 for sw2, 4 for sw3 etc
  • SW 7 sets single or dual axis operation - off for dual, on for single axis transverse to cable
  • SW 8 sets orientation - off for horizontal, on for vertical. For upside down, select horizontal and re-calibrate
  • SW 9 sets hysteresis 0.5 or 1 degree; off 1 degree, on 0.5 deg.
  • SW 10 sets damping factor - off standard, on less damping

Physical Characteristics

Dimensions: 57mm (width) x 82mm (length) x 35.2mm (height)

Documentation & Downloads

DISCLAIMER

Hummingbird Electronics has designed the product for use in a broad range of applications. It is however solely the customer's responsibility to evaluate the device and determine it's suitability in their end application.

Hummingbird Electronics does not suggest or make any recommendation as to the suitability of parameters that determine angle, height, impact, speed, force, accident, harsh braking, roll-over or rate-of-turn events, input or output voltage or current. Parameter values stated or implied in this document are for explanation only and should not be taken as typical or representative of a real world situation.


USE OF PRODUCTS

Products are not authorised for use in critical safety or other applications where a failure may reasonably be expected to result in personal injury, loss of life, or catastrophic property damage. If a customer uses or sells the products for use in any such applications, the customer acknowledges that such use or sale is at customer's sole risk. The customer will indemnify, defend or hold Hummingbird Electronics and their electronic component suppliers/assemblers harmless from and against any and all liabilities and costs arising out of or in connection with use of product or sale.
2 Axis Tilt Switch
  • 2 Axis Tilt Switch

Price (AUD, ex GST) $195.45

Optional Accessories

Combination LED and Alarm
Volts: 12 $22.13
Volts: 24 $50.00
 

Similar items