Premium Digital Inclinometer (HMDS7000A-KIT)

Hummingbird Electronics' Premium Inclinometer provides a highly visible and configurable pitch and roll display to operators of industrial machinery. Many aspects of Hummingbird's Inclinometer are customisable, including positioning and sensitivity of the sensors, separate alarms and warnings for stationary or moving vehicles and four distinct primary display options.

Warning and alarm events are logged to a microSD® card, to allow for later review and reporting.

Individual outputs for pitch and roll warnings can drive external relays, buzzers or can be connected to a vehicle management system. Integrated relays for alarm and warning conditions provide normally-open and common outputs. All warnings and alarms can be configured to be normally-on or normally-off.

Optional password protection on the setup menu can be configured by the user.

The Premium Digital Inclinometer has an adjustable industrial mount and colour transflective LCD display for high visibility, day or night.

The solid aluminium construction of the unit ensures that it is suitable for the rugged Australian mining and construction industries.

The ability to customise the display, including one numerical and three graphical display options makes it very versatile.

The unit has a highly configurable warning and alarm functionality, which includes an optional override system.

• 9V to 36V supply voltage
• Adjustable industrial mount
• Industrial-rated transflective LCD display for high visibility, day or night
• Solid aluminium construction
• Customisable display, including one numerical and three graphical display options
• Highly configurable warning and alarm functions, including an optional override system
• Internal buzzer, making the inclinometer operational without any additional buzzers or alarms
• Relay and voltage outputs for integration with external systems

• Input voltage: minimum 9V; maximum 36V
• Power consumption (W): maximum 2.5W (200mA @ 12V) – includes dual axis tilt sensor
• Relay output: normally-open; 36V max, 1A max
• Warning outputs: 150mA source or sink, short circuit protected
• Non-trigger output (warning outputs): no load, less than 400mV; 100mA sink, less than 800mV
• Trigger output (warning outputs): no load – more than Vin-1.4; 100mA source, more than Vin-2
• Analog outputs: 0-10V over customisable range. 5mA max source.
• Maximum tilt: -90 to 90 degrees, recommended use -60 to 60 degrees
• Accuracy: one degree from 0 to 30 degrees, 2 degrees from 30-60 degrees
• Refresh rate: 10 updates per second
• Frequency response: 10Hz to 0.1Hz, user settable (limited response in graphical display modes)
• Communications protocol: enhanced RS485 – differential, will operate with one broken connection

• Dimensions – 130mm (width), 110mm (height), 35mm (depth)

• Operating temperature: -10°C to 55°C
• Humidity: 5% to 95% relative humidity

HMDS7000A Manual.pdf
Warranty

DISCLAIMER

Hummingbird Electronics Pty Ltd has designed the product for use in a broad range of applications. It is however solely the customer's responsibility to evaluate the device and determine it's suitability in their end application.

Hummingbird Electronics Pty Ltd does not suggest or make any recommendation as to the suitability of parameters that determine angle, height, impact, speed, force, accident, harsh braking, roll-over or rate-of-turn events, input or output voltage or current. Parameter values stated or implied in this document are for explanation only and should not be taken as typical or representative of a real world situation.

---

USE OF PRODUCTS

Products are not authorised for use in critical safety or other applications where a failure may reasonably be expected to result in personal injury, loss of life, or catastrophic property damage. If a customer uses or sells the products for use in any such applications, the customer acknowledges that such use or sale is at customer's sole risk. The customer will indemnify, defend or hold Hummingbird Electronics and their electronic component suppliers/assemblers harmless from and against any and all liabilities and costs arising out of or in connection with use of product or sale.