Hummingbird Electronics’ enhanced GPS Speed Alert provides drivers with an accurate, highly visible, fast response digital speedometer and over-speed alert in a small, easy to mount unit.

Long distance drivers know just how tricky speed limits can be.  You don't want to drive much slower than the official speed limit, extend your trip and risking tiredness but you also don't want to speed, risk a fine and or worse.  Hummingbird Electronics’ GPS Speed Alert helps you avoid exceeding the speed limit meaning you can spend less time looking at the speedometer and more time concentrating on the traffic.

The GPS Speed alert operates independently from the vehicle's speedometer and only needs power, typically from the cigarette lighter socket to operate.  Install time is as long as it takes to unpack the box, attach it to the windscreen and plug it in.  Highly accurate speed is derived using the GPS and GLONASS satellite networks and so, unlike some older technology solutions, it does not need to be connected to the vehicles speed source and it does not need to be calibrated.

Additional compass and detailed modes provide heading, position and battery voltage.  These features are regularly used by off-road drivers to assist with navigation.  If event rules require it, the position screen can be permanently disabled.

 The Hummingbird Electronics’ GPS Speed Alert is part numbered HMSA3000, it is supplied with a strong compact windscreen mount and cigarette plug for connection to power however, you can choose to wire direct to the vehicle by detaching the cigarette plug and wiring direct to the vehicle.

Remote battery monitoring – No more wires.

The Hummingbird Electronics’ RF Battery Monitor allows the user to monitor the main vehicle start, auxiliary, caravan, boat, fridge, solar and many other batteries simultaneously. Even the battery in that motor bike you never ride!

For drivers with heavy trailers or caravans, it is important to know that the breakaway battery is fully charged and ready for action, keeping you safe. After a long journey, making sure that the stubbies are cold and the meat is fresh, will by some, be considered almost as important. Hummingbird Electronics’ RF battery monitor is the perfect solution to both problems.

Hummingbird Electronics’ RF Battery Monitor can be optioned to monitor up to 4 batteries wirelessly providing a real-time readout of battery voltage.  It requires no wiring on the vehicle side with the only connection to the vehicle being that the receiver is plugged into the cigarette lighter socket however many users choose to wire more permanently by removing the cigarette plug and wiring direct.  On the auxiliary battery side, the transmitter simply connects to the battery positive and negative and with little effort required to pair to the receiver.

In the event that the remote battery voltage drops below a user settable threshold, the screen changes colour, and a buzzer sounds.  In addition to remote battery monitoring, the RF Battery Monitor provides a real-time voltage-readout of the battery from which it is powered, say your start battery.

The Hummingbird Electronics’ RF Battery Monitor is part numbered HMRF2000, it comes supplied with a strong compact windscreen mount and cigarette plug for connection to power however, you can choose to wire direct to the vehicle by detaching the cigarette plug and wiring direct to the vehicle.